int offset;

offset = (inlet_offset + param_offset);

disp_d0 = ((attr_table.array[__USAT((offset + 0), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d1 = ((attr_table.array[__USAT((offset + 1), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d2 = ((attr_table.array[__USAT((offset + 2), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d3 = ((attr_table.array[__USAT((offset + 3), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);

disp_d4 = ((attr_table.array[__USAT((offset + 4), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d5 = ((attr_table.array[__USAT((offset + 5), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d6 = ((attr_table.array[__USAT((offset + 6), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d7 = ((attr_table.array[__USAT((offset + 7), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);

disp_d8 = ((attr_table.array[__USAT((offset + 8), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d9 = ((attr_table.array[__USAT((offset + 9), attr_table.LENGTHPOW)]
            << attr_table.GAIN) >>
           1) +
          (1 << 26);
disp_d10 = ((attr_table.array[__USAT((offset + 10), attr_table.LENGTHPOW)]
             << attr_table.GAIN) >>
            1) +
           (1 << 26);
disp_d11 = ((attr_table.array[__USAT((offset + 11), attr_table.LENGTHPOW)]
             << attr_table.GAIN) >>
            1) +
           (1 << 26);

disp_d12 = ((attr_table.array[__USAT((offset + 12), attr_table.LENGTHPOW)]
             << attr_table.GAIN) >>
            1) +
           (1 << 26);
disp_d13 = ((attr_table.array[__USAT((offset + 13), attr_table.LENGTHPOW)]
             << attr_table.GAIN) >>
            1) +
           (1 << 26);
disp_d14 = ((attr_table.array[__USAT((offset + 14), attr_table.LENGTHPOW)]
             << attr_table.GAIN) >>
            1) +
           (1 << 26);
disp_d15 = ((attr_table.array[__USAT((offset + 15), attr_table.LENGTHPOW)]
             << attr_table.GAIN) >>
            1) +
           (1 << 26);